Hudson-robotics LabLinx Manual de usuario descargar pdf (Pagina 11)

StackLink User Manual Hudson Robotics, Inc.

Setting Up StopLink(s)

 Position the StopLink in the desired location on the track and secure its position

with the supplied Phillips head screws. (Figure 12)

 Connect modular plugs of the black coiled cable into both the StopLink and the

desired port on the side of the StackLink (Figure 9/10).

 Adjustments may be needed depending on the size and type of plates used. Place

a plate on the track in front of the StopLink sensor to activate the fingers. Loosen

the 2 hex screws on the StopLink (Figure 8) and adjust the width of the sides so

the plate is secure between the fingers without any movement.

Figure 8

StopLink Positions 1-4

Figure 9

Adjustment

screws

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 33 34

Sin comentarios

Hudson-robotics LabLinx Manual de usuario Pagina 11